WVSR1060GW GE Washer Parts List

Search the entire WVSR1060GW by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5
1-15 of 62

Tub dampening strap (washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.)

This part is used to support the tub and keep it in the center of the cabinet to reduce vibration. If your washer is making loud noises, or shakes or moves, one or more of the straps may have broken. It is recommended to replace all 4 tub dampening straps at the same time. This part is sold individually.

Easy Part #:
EAP271100
Availability:
In Stock
Price:
$8.95

D-shaped knob clip (knob clip)

This control knob clip helps secure the timer knob to the shaft allowing you to select the desired setting for your dryer. If the knob has become loose or the clip is missing you will need to replace the clip. This clip is a genuine OEM part, made of metal and is sold individually.

Easy Part #:
EAP268493
Availability:
No Longer Available

Control knob and clip - white (control knob assembly in white. This knob is used on both washing machines and dryers.)

This knob and clip set is an OEM replacement part for your washer or dryer. The knob accepts a D-shaped shaft and is sold individually.

Easy Part #:
EAP9493075
Availability:
In Stock
Price:
$29.36

Timer knob (washer timer knob in white.)

This replacement timer knob for your washer is white in color.

Easy Part #:
EAP1482286
Availability:
In Stock
Price:
$7.63

Tub seal (washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.)

The tub seal helps prevent any leaking around the transmission of your washer outer tub. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. It is suggested to have it installed by a qualified technician because the seal can be difficult to replace. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP4704237
Availability:
In Stock
Price:
$12.50

Drain hose (washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.)

This corrugated drain hose carries the drain water from the washer to the house drain. It is black in color, measures 57-inches long, and both ends of the drain hose can be bent. If your drain hose becomes damaged or cracked, it will cause water to leak on the floor during the wash cycle and you will need to replace the hose. This is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the washer before starting your repair. Note: Clip is not included.

Easy Part #:
EAP890597
Availability:
In Stock
Price:
$24.10

Drain pump and motor assembly (washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle.)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP8768445
Availability:
In Stock
Price:
$59.61

Dial with compression ring (washer timer dial assembly. This timer dial is white with a black arrow pointer.)

This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your old timer dial is cracked or damaged, or if it is not indicating correctly. This part is sold separately from the timer knob, and the timer knob clip.

Easy Part #:
EAP1482363
Availability:
In Stock
Price:
$13.30

Agitator coupling (washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.)

Bolt not included. This part connects the transmission drive shaft to the agitator base.

Easy Part #:
EAP1482517
Availability:
In Stock
Price:
$23.85

Inner tub base hub (hub, inner tub base)

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.

Easy Part #:
EAP273296
Availability:
In Stock
Price:
$80.33

Socket rod support - white (suspension rod support)

This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tub from shaking too much during operation. If your washer is shaking excessively or emitting an odd sound during use, it may be because the rod support is broken, and the suspension rod is not able to do its job. This part is made of white plastic and is sold individually.

Easy Part #:
EAP268394
Availability:
In Stock
Price:
$10.79

Water level pressure switch (pressure switch for water fill level)

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the correct water level has been reached.

Easy Part #:
EAP269790
Availability:
In Stock
Price:
$47.94

Transmission and brake assembly (transmission and brake assembly, includes new tub seal)

This transmission and brake assembly comes with a new tub seal. This kit aids in the spinning or agitating cycles.

Easy Part #:
EAP271743
Availability:
No Longer Available

Screw - 1/4-20 mch hxw 5/8 s (scr 1/4-20 mch hxw 5/8 s)

This is a replacement screw for your washer. The screw has a hex head and is approximately 1 inch in length. The washer portion of this screw is approximately 1 inch in diameter. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Easy Part #:
EAP1482328
Availability:
In Stock
Price:
$12.69

Triple water valve

The triple water valve or inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually.

Easy Part #:
EAP1482390
Availability:
In Stock
Price:
$77.39
< PREV 1 2 3 4 5
1-15 of 62