Parts for Kenmore Models XSS25GGHNCWW

Ice maker (icemaker)

This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold into the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4-pin wire harness adapter, and a tube. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:: EAP1993870

Availability:: In Stock - Ships Today

Price:: $203.44

Temperature sensor (sensor temp ff)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.

Easy Part #:: EAP304103

Availability:: In Stock - Ships Today

Price:: $20.92

Dispenser door solenoid assembly (solenoid asm)

This part is a possible option when ice door won't open or shut properly or when water is not dispensing.

Easy Part #:: EAP1483583

Availability:: In Stock - Ships Today

Price:: $60.92

Dispenser door assembly or flapper (door recess asm)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Easy Part #:: EAP964304

Availability:: In Stock - Ships Today

Price:: $14.54

Defrost heater and bracket assembly (heater & bracket assy)

The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.

Easy Part #:: EAP303781

Availability:: In Stock - Ships Today

Price:: $90.50

Middle crisper pan (pan middle asm)

Fruits and vegetable drawer.

Easy Part #:: EAP16619591

Availability:: In Stock - Ships Today

Price:: $91.26

Middle pan cover frame - no glass (cover middle pan)

This is the frame only. Glass is NOT included and must order separately.

Easy Part #:: EAP11766703

Availability:: In Stock - Ships Today

Price:: $50.16

Compression ring (ring compression)

The compression ring works for a variety of fans throughout your refrigerator, the evaporator fan or condenser fan. If you notice your refrigerator or freezer is too warm, or there is an unusual sound during operation you may need to replace the compression ring. This part is made of metal, measures approximately 0.25” L x 0.5” in diameter, and is sold individually. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP1015726

Availability:: In Stock - Ships Today

Price:: $9.03

Lid bumper (bumper)

This orange rubber bumper prevents the condenser fan motor from bumping against the mounting bracket every time the fan motor starts. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side bracket on the evaporator fan motor assembly. It has a rounded top and a slightly pointed bottom. The bumper is a genuine OEM part and is sold individually.

Easy Part #:: EAP284979

Availability:: In Stock - Ships Today

Price:: $10.33

Light switch (switch light)

This is the light switch that goes in your refrigerator. If the light is not working or stays on, you may need to replace the switch. It is made of mainly white plastic, and is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screwdriver to pop the switch out from the refrigerator wall, then disconnect the wires. Reconnect the wires to the new switch, snap it into place, and the repair is complete.

Easy Part #:: EAP10066583

Availability:: In Stock - Ships Today

Price:: $14.13

Water tank assembly (water tank disp asm)

This tank stores water until the water actuator is activated and water is requested.

Easy Part #:: EAP783769

Availability:: In Stock - Ships Today

Price:: $43.16

Union connector - 5/16 inch to 5/16 inch (union connector)

Quick connector for plastic water line - 5/16" to 5/16"

Easy Part #:: EAP758446

Availability:: In Stock - Ships Today

Price:: $8.50

Run capacitor (capacitor 12 uf)

The run capacitor is attached to the compressor and is 12 UF. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11764031

Availability:: In Stock - Ships Today

Price:: $61.85

Refrigerator crisper drawer (pan bottom asm)

This part is the replacement bottom crisper drawer for your refrigerator. The crisper drawer is used to store food items, and because it is made of plastic, it can occasionally become cracked or broken. You may notice a leak from the bottom of the drawer, and this can indicate damage to the crisper drawer. To replace the drawer, simply slide the old one out, and replace it with the new one. This crisper is made of white and clear plastic and measures approximately 22 inches wide, 15 inches tall, and 19 inches deep. This part is sold individually and is designed for the bottom drawer of your refrigerator.

Easy Part #:: EAP12744065

Availability:: In Stock - Ships Today

Price:: $76.41

Dispenser door recess crank (crank door recess)

The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips screwdriver. If your dispenser door will not close properly, or ice is not dispensing properly, you may have a damaged door recess crank. This part is made of white plastic and is sold individually.