8MSF25N4BW00 Refrigerator Parts List

Refrigerator door shelf bin (refrigerator door bin)

The door bin attaches to the inside of your refrigerator door to hold bottles or jars and can be moved according to space needed. If the door bin is cracked or the mounting tabs have broken off, you will need to replace the bin. The bin is clear with white trim around the top edge. This is a genuine OEM part and is sold individually.

Refrigerator crisper drawer with handle (refrigerator deli drawer)

This clear convertible meat drawer can be used to store meats or vegetables. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food being kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high, and is a genuine OEM replacement part. It is sold individually.

Refrigerator slide-out shelf with glass (refrigerator spill-safe shelf)

Lower door closing cam (refrigerator door closer cam)

The door cam helps keep the door closed in the correct position. The cam is mounted around the door pivot point and is made up of a series of ridges and valleys to help keep the door in position. When you open the door, the cam will raise the door ever so slightly, then drop down into another valley to hold the door open. Then as you close the door again, just before the seal contacts the cabinet, the door will fall into another valley helping to hold the door closed. If your refrigerator uses a door closer, the door should shut all by itself. This part is black in color and made of plastic. This is a genuine OEM part.

Refrigerator shelf frame with glass (refrigerator shelf)

Crisper cover with glass (refrigerator drawer cover)

This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on the rails. Follow the instructions in the owner's manual or installation guide when installing this part. This comes with glass.

Refrigerator shelf glass (refrigerator shelf)

This is the glass panel only. The frame is sold separately.

Refrigerator door switch (refrigerator light switch)

Door switch turns the light off when you close the door.

Snack pan - clear (refrigerator snack pan drawer)

The snack pan in your refrigerator stores food and other items that you intend to keep cold. It is the top drawer in the refrigerator and is also the smallest of the three drawers in this model. It is made of clear plastic and slides into a drawer glide attached to the top glass shelf. The drawer measures 16 inches by 16-1/2 inches by 4-3/4 inches. If your snack pan is cracked or damaged, you may want to replace it. This drawer contains a series of ribs in the bottom of the drawer. Be sure to check the drawer glides and the glass shelf that correspond to the snack pan in your refrigerator if the pan will not slide in or out properly.

Bi-metal defrost thermostat (refrigerator defrost bi-metal thermostat)

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

Crisper pan - clear (refrigerator crisper drawer)

Sold individually. This crisper drawer is clear in colour. The crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.

Icemaker (refrigerator ice maker kit)

This ice maker kit includes everything needed to install a new icemaker in your refrigerator if it did not originally come with one. The kit includes the ice maker, ice bin, inlet valve, fill tube, hardware, 4 wire harness, connector for freezer, and instructions. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair. Note: This part has been updated by the manufacturer, it may differ in appearance but will still function the same as the original.

Touch-up paint - white (appliance touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Screw (refrigerator screw)

Sold individually.

Screw (refrigerator door handle mounting screw)

This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.