DBLR453GT0WW Dryer Parts List

Adjustable leveling screw (screw levelling 5/16-24)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

M - series secondary coil - 2 terminals

This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valves while the dryer is running. This coil is used with two coil gas shut off valve assemblies. Be sure to turn off the gas before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Front drum bearing (support front brg)

This front dryer drum bearing does not come with slides.

Door strike

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.

Screw (scr 8-18 ab hxw 3/8 s)

This screw is sold individually.

Air duct felt seal

If your dryer is making a squeaking noise this seal may need to be replaced.

Dryer door handle

Almond in color.

Drive motor (motor asm form-j)

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

Blower wheel (wheel blower)

This wheel attaches to the motor.

Door switch (switch asm push button)

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

Screws - package of 12 (scr 8-18 b hxw 1/4 s)

These are replacement screws designed to fit your range. They are made of metal and are approximately ¼ inch long. They come in a package of 12. These are OEM parts sourced directly from the manufacturer.

Heat detector

Also known as Flame Sensor/Detector.

Clamp& screw (clamp)

Door hinge (hinge)

Screws NOT included.

Plug door rvsbl (plug door rvsbl wh)

Sold individually.