RSG Parts List

Drawer slide rail - right side (slide asm rh)

This replacement drawer slide rail is for the right-hand side of your refrigerator. This part attaches to the inside wall of your refrigerator to support the sliding crisper drawer. If the rail is broken or the drawer is not sliding properly, you will need to replace the slide rail. You will need a Phillips screwdriver to complete this repair.

Drawer slide rail - left side (slide asm lh)

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. This part includes the rail only.

Temperature sensor (sensor temp)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.

Defrost thermostat (thermostat defrost)

This defrost thermostat acts as a safety device against over heating in case of mechanical failure.

Evaporator fan grommet - red (grommet evap fan)

This red evaporator fan motor grommet provides a cushion between the fan motor and the motor mounting bracket. If the grommet is damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer. Please remember to disconnect the power to the refrigerator before starting your repair.

Vegetable drawer - clear (pan veg)

Sold individually. This is used in refrigerator to store vegetable and fruits at an optimal temperature

Dispenser door solenoid assembly (solenoid asm)

This part is a possible option when ice door won't open or shut properly or when water is not dispensing.

Defrost timer - 60hz 120v (use 215846602)

This 60Hz 120V defrost timer will cycle for thirty minutes after every eight hours of run time. You can turn the dial on the defrost timer clockwise to be able to advance it in and out of defrost mode. The defrost timer helps melt away any ice that may have built up on the evaporator coils. If your refrigerator/freezer is too warm or too cold, will not advance into the defrost cycle, freezer will not defrost, or it runs too long, the defrost timer may be defective and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Dispenser door assembly or flapper (door recess asm)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Bucket auger (auger asm disp)

The ice bucket auger is located within the ice bucket assembly in your freezer. It stirs and dispenses the ice in the bucket. You may need to replace the auger if your ice maker is noisy, or not dispensing ice. Disassembly of the ice bucket assembly is necessary to replace this part. Turn off power to the appliance before removing the ice bucket assembly to do this repair.

Refrigerator ice bucket and auger assembly (nut auger frt disp)

Drawer slide rail - right side (slide asm rh)

This is the drawer slide rail or slide assembly for your refrigerator. You will find the drawer slide rail at the bottom of your refrigerator, mounted to the right-hand side of the cabinet wall. It is designed to hold the bottom shelf in place. You will want to make sure you are replacing the bottom rail, as the top one is a longer rail. The slide rail is held in place with two Phillips screws and is made of white plastic.

Door dairy

This is the replacement dairy door for a refrigerator. It is installed on the inner door and rotates up and down to allow access to the dairy compartment. It is made of clear plastic. If your dairy door is cracked, broken, missing, or won't stay on, you may need to replace it. This is an OEM part sourced directly from the manufacturer.

Dispenser crusher cover (cover crusher hsg disp)

This part is white in color.

Dispenser light (bulb recs 12v)

This twelve volt dispenser light bulb is a little under two inches long.